ACCESS PANEL DOORS

1RAF Overview

Overview:

It is usually used as a access door .The grille type 1RAF is used for the exhaust and supply of large quantities of air with minor pressure loss in facilities such as offices, warehouses, shopping centers….

The grille type 1RAF is used for the exhaust of large quantities of air with minor pressure loss and as access door for the equipment like fan-coil etc. The access door opens and closes on a push-push action. It locks on the first push and releases with the second push

Product Features:

• 1/3" spaced fins set at 20 degrees.
• Effectively conceals filter.
• Use standard 1" thick disposable filters (not included).
• Removable face for easy installation and cleaning.
• Equipped with adjustable filter retainers.
• Primary use: Side wall and ceiling

CMK Overview

Overview:

The frame is manufactured from ETIAL-60 Norm aluminium extruded profile. There is a neoprene gasket between the cover and the frame, which can withstand 90ºC. The cover is made of ETIAL-5 norm aluminium sheet. Insulation material is glasswood as per DIN 4102 Class A

Product Features:

• 22 gauge steel frame
• 22/24 gauge steel door panel
• Durable white powder coat finish
• Hinged at top and bottom latched
• The cover can be produced with insulated or uninsulated
• The cover will be hinged at one side and secured at the other and by mean of either a key lock or a triangular socket lock

DMK Overview

Overview:

DMK Series Access door: Provides an access door function for fan coil units and mechanical installation The access door opens and closes on a push-push action. It locks on the first push and releases with the second push.

Product Features:

• 22 gauge steel frame
• 22/24 gauge steel door panel
• Durable white powder coat finish

FMK Overview

Overview:

FMK Series control covers, with low pressure losses of air in large quantities; The distributor offers architectural solutions thanks to its decorative appearance, making it easy to control a fault or system thanks to its on-off feature, as used in floor type fan-coils

Product Features:

• LMK1 : Linear grille with 15º angle fixed standard blades
• LMK2 : Linear grille with 15º angle fixed slim type blades
• LMK3 : Linear grille with 35º angle fixed type blades
• LMK-Y 1,2,3 : Linear grille for floor applications with special mounting frame
• EU2, EU3, EU4, EU5 type synthetic filter on back of grille

KPMK Overview

Overview:

It is usually used as a access door .The grille type KPMK is used for the exhaust and supply of large quantities of air with minor pressure loss in facilities such as offices, warehouses, shopping centers….

The grille type KPM is used for the exhaust of large quantities of air with minor pressure loss and as access door for the equipment like fan-coil etc. The access door opens and closes on a push-push action. It locks on the first push and releases with the second push.

Product Features:

• Frame thick: 1.1mm
• The blades can be 0°
• High free area: 90%.
• Different size can be request.

LMK Overview

Overview:

It is usually used as a access door .The grille type LMK is used for the exhaust and supply of large quantities of air with minor pressure loss in facilities such as offices, warehouses, shopping centers….

The grille type LMK is used for the exhaust of large quantities of air with minor pressure loss and as access door for the equipment like fan-coil etc. The access door opens and closes on a push-push action. It locks on the first push and releases with the second push.

Product Features:

• Frame thick: 1.1mm
• The blades can be 0º, 15°, 35º
• High free area: 90%.
• Different size can be request.

SK Overview

Overview:

SK : The shaft lid protects your electrical and mechanical installations on the structure in a safe and decorative way. In the event of a possible fire, the installation shafts allow the fire to move quickly to the upper zones by making a chimney effect, preventing the use of the installation shaft cover and the fires that occur in the neighborhood to reach the installation sites and fires that may occur in the installation shafts.

Product Features:

• SK Series control flaps, the Fire Resistant Shaft Cover provide all the functionality, as well as keeping the fire area at minimum level for 90 minutes and allowing people to escape to safe zones. Smoke and heat are two key elements that cause damage to the fire, and the Shaft Cover does not allow exposure to these elements.
• Fixed outer frame Aluminum and moving inner frame are manufactured from galvanized material resistant to bending and buckling.
• The cover can be produced with insulated or uninsulated
• Open-close mechanism, automatic touch-operated and Hinged

TMK Overview

Overview:

TMK Drywall control covers; Plasterboard, Boardex, Guardex, Aqua Panel Vb. Structural materials The ceiling or the wall that is to be constructed, the areas to be intervened (the Wiring harnesses, control panels, etc.).

Product Features:

• TMK Drywall control covers; Which can be opened with a small touch and onto which paint, ceramics or similar materials can be applied. It is a construction element that houses movement and safety elements (Hidden Hinge, Switch, Safety Waste, etc.). (12.5 mm, 15 mm and 25 mm) Thickness; It is suitable for use with Plasterboard, Boardex, Guardex, Ferfore Plasterboard, Aquapanel
• The access door opens and closes on a push-push action. It locks on the first push and releases with the second push.
• Spring hinged can also be made.

YDK Overview

Overview:

YDK: In shaft 1049ºC - 120 minutes, Out of shaft 1006ºC - 90 minutes The shaft lid protects your electrical and mechanical installations on the structure in a safe and decorative way. In the event of a possible fire, the installation shafts allow the fire to move quickly to the upper zones by making a chimney effect, preventing the use of the installation shaft cover and the fires that occur in the neighborhood to reach the installation sites and fires that may occur in the installation shafts.

Product Features:

• The fixed outer frame and the moving inner frame are made of aluminum material resistant to bending and buckling. Fire Wicks Graphite, Drywall A1 boardex
• YDK Series control flaps, the Fire Resistant Shaft Cover provide all the functionality, as well as keeping the fire area at minimum level for 90 minutes and allowing people to escape to safe zones. Smoke and heat are two key elements that cause damage to the fire, and the Shaft Cover does not allow exposure to these elements.
• The outer frame is applied as a standard by screwing on the gypsum board